Get Peace of Mind with an Air Quality & Mold Detection Survey
In fact, the EPA has listed indoor air pollution among the top five environmental dangers posed to Americans today.
Getting regular measurements of your home’s indoor air quality is a vital step in ensuring the health of your family.
Fast & Accurate Measurement
A Cost-Effective Solution
PM2.5 & PM10 – Particulate Matter Sizes in Micrometers
What are PM2.5 and PM10 Pollutants?
These tiny fragments are made up of various components, such as acids, toxic exhaust, organic chemicals, metal, dust, soot, soil,or a mixture of these components. There are many classes of particulates. However, among these classes, PM10 and PM2.5 are the most regulated ones.
- PM10 refers to inhalable coarse particles that are with a diameter of about 10 micrometers.
- PM2.5 refers to fine particles that are 2.5 micrometers in diameter and smaller.
Sources of PM2.5 & PM10
There are both natural and anthropogenic (i.e. manmade) sources of PM2.5. Carbonaceous (organic) material from traffic causes a direct adverse effect on health and has been identified as a most evident source of PM2.5. Burning fuels such as oil, gasoline, or wood can directly contribute to the rising of PM levels. On the other hand, windblown dust and chemical reactions between different gases (e.g., nitrogen, sulfur, phosphorus etc.) and other substances (e.g., ammonia) can indirectly enhance the rising of atmospheric PM levels.
Power stations as well as Industrial sources contribute most to manmade pollutants (35%), trailed by vehicles or road traffic (24%), suburban (13%), and shipping (10%). Natural sources of particulate matter include sea salt that results in 5-15% of urban background PM2.5 and with higher contributions found near the coastal areas.
Health Effects of PM2.5 & PM10
Exposure to airborne particulate matter (PM) has harmful consequences on human health, the environment, and climate change. Many researches have already provided multitudes of information concerning the hazardous adverse effects of PM exposure.
As PM2.5 are finer particles, they can penetrate deeply and travel through the respiratory system to reach the lung. The Committee on the Medical Effects of Air Pollutants (COMEAP) reported that high-level exposure to PM could increase hospital admissions and premature death of the old and sick because of respiratory and cardiovascular system illnesses. As evidence, the COMEAP showed statistical data on high pollution days and this data revealed that both PM10 and PM2.5 caused additional hospital admissions and premature deaths. The EPA has more information on the effects of particulate pollution.2
Long-term PM exposure is associated with chronic respiratory, cardiovascular, and neurological diseases, including lung cancer, neurodevelopmental disorders, poor cognitive function, diabetes, and heart attack.
Short-term PM exposure during pollution episodes can produce less severe effects, including temporary breathing difficulty, worsening of asthma symptoms, feeling of unwell, decreased activity level, etc.
In addition to adverse health effects, PM2.5 also has other widespread effects on the environment and climate change. The environmental effect can contribute to biodiversity loss, damaging plants as well as corrosion of buildings.
eTVOC – Equivalent Total Volatile Organic Compounds
What Does eTVOC Mean?
eTVOC stands for equivalent total volatile organic compounds (VOCs) and is a measurement of the total amount of any emitted gases coming from toxins and chemicals. When you have an enclosed space like a home or office, these emitted gases accumulate and pollute the air. The air quality survey does NOT speciate what all the VOCs are, it simply gives the total amount of all VOCs in the air.
Volatile organic compounds are gases that are given off by many indoor sources that evaporate at room temperature. Concentrations of most volatile organic compounds are higher in indoor air than outdoor air.
Sources of VOCs
Some sources of VOCs include the burning of fuels such as gas, wood and kerosene and tobacco products. VOCs can also come from personal care products such as perfume and hair spray, cleaning agents, dry cleaning fluid, paints and paint thinner, lacquers, varnishes, hobby supplies, alcohols, vinegars and from copying and printing machines.
Elevated VOC levels could be caused by a Mold infestation, gas leak, or off gassing of building materials and is a concern for overall indoor air quality. These compounds include a number of toxic compounds, including benzene, toluene, and formaldehyde. Mold can produce a number of VOCs. These compounds are what produce the “musty” smell associated with Mold infested dwellings. While most of the compounds are innocuous, there is experimental evidence that some of these compounds could be toxic. Detection of VOC is yet another tool that can be used to detect and locate an active mold infestation, as they are only produced by actively growing mold colonies.
VOCs can be released from products during use and even in storage. However, the amount of VOCs emitted from products tends to decrease as the product ages.
Formaldehyde, one of the most common VOCs, is a colourless gas with an acrid (sharp and bitter) smell. It is common in many building materials such as plywood, particleboard and glues. Formaldehyde can also be found in some drapes and fabrics and in certain types of foam insulation.
*Formaldehyde compounds are not speciated with the Pocket Particle AQI 2.0 Sensor.*
Health Effects of VOCs
Some VOCs are suspected of causing cancer and some have been shown to cause cancer in humans. The health effects caused by VOCs depend on the concentration and length of exposure to the chemicals.
Most people are not affected by short-term exposure to the low levels of VOCs found in homes. Some people may be more sensitive, such as people with asthma. For long-term exposure to low levels of VOCs, research is ongoing to better understand any health effects from these exposures.
eCO2 – Equivalent Carbon Dioxide
What Does eCO2 Mean?
Sources of CO2
Carbon dioxide is a byproduct of normal cell function when it is breathed out of the body. CO2 is also produced when fossil fuels are burned or decaying vegetation. Surface soils can sometimes contain high concentrations of this gas, from decaying vegetation or chemical changes in the bedrock.